Tel: +84 254 3577447 / HP: +84 966 000 124|datviet@datvietco.com

SKF Belt Alignment Tool TKBA 40 (previously TMEB 2)

Highly accurate tool for V-belt pulley alignment

The SKF TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy and fast to attach. The three–dimensional target area on the receiver unit allows the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel or a combination of all three.

Mô tả

SKF Belt Alignment Tool TKBA 40 (previously TMEB 2)

Features and benefits

skf-tkba40-datvietco

  • Powerful magnets allow fast and easy attachment
  • Three-dimensional target area simplifies the alignment process
  • Facilitates simultaneous adjustment of tension and alignment
  • V-guides facilitate the alignment of a wide range of V-belt pulleys
  • Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
  • A maximum operating distance of 6 m (20 ft) accommodates many applications
  • Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory

 

Technical data

Designation TKBA 40
Type of laser Red laser diode
Laser 1x Built-in class 2 laser,
Laser line length 3 m at 2 m (9.8 ft at 6.6 ft)
Measurement accuracy angular Better than 0,2°
Measurement accuracy offset Better than 0,5 mm (0.02 in.)
Measurement distance 50 mm to 6 000 mm (2 in. to 20 ft)
Control Laser on/off switch
Housing material Extruded aluminium
Dimensions
  Transmitter unit 70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in.)
  Receiver unit 96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in.)
  Reflector dimensions N/A
Weight
  Transmitter unit 320 g (0.7 lbs)
  Receiver unit 320 g (0.7 lbs)
Mounting Magnetic, groove mounted
(optional side adapter TMEB A2)
V-guides Size 1: 22 mm, short rods (3x pairs)
Size 2: 22 mm, long rods (3x pairs)
Size 3: 40 mm, short rods (3x pairs)
Size 4: 40 mm, long rods (3x pairs)
Battery 2x AA Alkaline type IEC LR03
Operation time 20 hours continuous operation
Carrying case dimensions 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in)
Total weight (incl. case 1.3 kg (2.8 lbs)
Operating temperature 0 to 40 °C (32 to 104 °F)
Storage temperature –20 to +65 °C (–4 to +150 °F)
Relative humidity 10 to 90% RH non-condensing
IP rating IP 40
Calibration certificate Valid for two years
Case contents 1x TKBA 40 transmitter unit
1x TKBA 40 receiver unit
2x AA batteries
4x sizes of V-guides, 3x of each size
1x Printed instructions for use
1x Calibration certificate

Accessories

Designation Description
TKBA G2 Set of V-guide with guides (each 3 pcs): 22mm short, 22mm long, 40mm short, 40mm long
TMEB A2 Magnetic side adapter for aligning chain sprockets and timing and ribbed belts, pulleys

Spare parts

Designation Description
TDTC 1/A Toolcase without inlay

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “SKF Belt Alignment Tool TKBA 40 (previously TMEB 2)”

Product Enquiry

Go to Top