Tel: +84 254 3577447 / HP: +84 966 000 124|datviet@datvietco.com

Belt alignment tools TKBA 10 and TKBA 20

Belt alignment tools TKBA 10 and TKBA 20

Versatile tools for pulley and sprocket alignment

The SKF TKBA 10 and TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Mô tả

Belt alignment tools TKBA 10 and TKBA 20

Versatile tools for pulley and sprocket alignment

The SKF TKBA 10 and TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Features and benefits

  • Powerful magnets allow fast and easy attachment
  • Facilitates simultaneous adjustment of tension and alignment
  • Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
  • SKF TKBA 10 utilises a red laser and can be used for distances up to 3 m (10 ft)
  • SKF TKBA 20 utilises a highly visible green laser and can be used for distances up to 6 m (20 ft). It can even be used outdoors in sunny conditions
  • Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process

 TKBA 10

belttkba10-datvietco

case-tools-belt-tkba10-datvietco

Technical data
DesignationTKBA 10
-Type of laserRed laser diode
-Laser1x Built-in class 2 laser,
-Laser line length2 m at 2 m (6.6 ft at 6.6 ft)
-Measurement accuracy angularBetter than 0,02° at 2 m (6.6 ft)
-Measurement accuracy offsetBetter than 0,5 mm (0.02 in.)
-Measurement distance50 mm to 3 000 mm (2 in. to 10 ft)
-ControlLaser on/off rocker switch
-Housing materialAluminum, powder coat finish
-Dimensions
  -Transmitter unit169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
  -Receiver unit169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
  -Reflector dimensions22 x 32 mm (0.9 x 1.3 in.)
-Weight
  –Transmitter unit365 g (0.8 lbs)
  –Receiver unit340 g (0.7 lbs)
-MountingMagnetic, side mounted
-V-guidesN/A
-Battery2x AAA Alkaline type IEC LR03
-Operation time25 hours continuous operation
-Carrying case dimensions260 x 85 x 180 mm (10.3 x 3.4 x 7.0 in.)
-Total weight (incl. case)1,3 kg (2.9 lbs)
-Operating temperature0 to 40 °C (32 to 104 °F)
-Storage temperature–20 to +60 °C (–4 to +140 °F)
-Relative humidity10 to 90% RH non-condensing
-IP ratingIP 40
-Calibration certificateValid for two years
-Case contents1x TKBA 10 transmitter unit
1x TKBA 10 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate

TKBA 20

belt-tkba20-datvietco

case-tools-belt-tkba20-datvietco

Technical data
DesignationTKBA 20
-Type of laserGreen laser diode
-Laser1x Built-in class 2 laser,
-Laser line length2 m at 2 m (6.6 ft at 6.6 ft)
-Measurement accuracy angularBetter than 0,02° at 2 m (6.6 ft)
-Measurement accuracy offsetBetter than 0,5 mm (0.02 in.)
Measurement distance50 mm to 6 000 mm (2 in. to 20 ft)
-ControlLaser on/off rocker switch
-Housing materialAluminum, powder coat finish
-Dimensions
-Transmitter unit169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
-Receiver unit169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
-Reflector dimensions22 x 32 mm (0.9 x 1.3 in.)
-Weight
-Transmitter unit365 g (0.8 lbs)
-Receiver unit340 g (0.7 lbs)
-MountingMagnetic, side mounted
-V-guidesN/A
-Battery2x AAA Alkaline type IEC LR03
-Operation time8 hours continuous operation
-Carrying case dimensions260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in.)
-Total weight (incl. case1,3 kg (2.9 lbs)
-Operating temperature0 to 40 °C (32 to 104 °F)
-Storage temperature–20 to +60 °C (–4 to +140 °F)
-Relative humidity10 to 90% RH non-condensing
-IP ratingIP 40
-Calibration certificateValid for two years
-Case contents1x TKBA 20 transmitter unit
1x TKBA 20 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Belt alignment tools TKBA 10 and TKBA 20”

Product Enquiry

Go to Top