Tel: +84 254 3577447 / HP: +84 983276457|datviet@datvietco.com

SKF BEARING HEATER TIH MODEL

SKF Maintenance tools: Important stages which have a major impact on a bearing service life can be recognised during the bearing’s lifecycle. These stages are mounting, lubrication, alignment, basic condition monitoring and dismounting. The stages in a bearing life cycle are extremely important for achieving the maximum service life of the bearing. By applying the right maintenance practices and using the correct tools, you can considerably extend your bearing’s service life and increase plant productivity and efficiency.

Model: TIH 030m/230V – Small Size
TIH 110m/230V – Medium Size
TIH 220m/230V – Large Size

Categories: ,

Description

TIH MODEL- BEARING HEATER SELECTION TABLE WHICH HELP TO SELECT THE CORRECT BEARING HEATER SIZE TO ADAPT REQUIREMENT ON BEARING ASSEMBLY. THE SELECTION BASED ON 2 PARAMETER: THE WEIGHT OF BEARING/PULLEY AND THE MAXIMUM BORE DIAMETER

Origin: Netherlands

CO and CQ Certificate: original by SKF Singapore issued

 

Bearing heater devided to many types as below

 

Type 1: TIH 030m/230V: Máy gia nhiệt cảm ứng loại nhỏ sử dụng điện áp 230V

– Công suất 2 kVA, khối lượng vòng bi tối đa 40kg (trục d=20-300 mm)

– Cung cấp 3 thanh ngang tiêu chuẩn

– Vận hành theo chế độ nhiệt độ hay thời gian

– Tự động khử từ, bảo vệ quá nhiệt

– Điện áp 230V/50-60Hz or 110V/50-60Hz

– Bảo hành 12 tháng

 

Loại 2: TIH 100M/230V: Máy gia nhiệt cảm ứng loại trung bình

– Công suất 3,6 kVA, khối lượng vòng bi tối đa 120kg (d=20-400 mm)

– Thời gian gia nhiệt ngắn, tiết kiệm năng lượng

– Cung cấp 3 thanh ngang tiêu chuẩn

– Vận hành theo chế độ nhiệt độ hay thời gian

– Tự động khử từ, bảo vệ quá nhiệt

– Điện áp 230V/50-60Hz or 400-460V/50-60Hz

– Bảo hành 12 tháng

TIH 220M/LV, TIH 220M/MV: Máy gia nhiệt cảm ứng loại lớn

 

 

Loại 3: TIH 220M chia thành 2 loại nhỏ

+ TIH 220M/LV: điện áp thấp 230V/50-60Hz

+ TIH 220M/MV: điện áp cỡ trung 400-460V/50-60Hz

– Công suất 10 kVA, khối lượng vòng bi tối đa 300kg (d=60-600 mm).

– Thời gian gia nhiệt ngắn, tiết kiệm năng lượng.

– Cung cấp 2 thanh ngang tiêu chuẩn, trang bị thanh trượt.

– Vận hành theo chế độ nhiệt độ hay thời gian.

– Tự động khử từ, bảo vệ quá nhiệt

.- Bảo hành 12 tháng

 

 

A portable induction bearing heater weighing only 4.5 kg (10 lbs): TMBH 1

 

The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4 to 5 kg (9 to 11 lb). The heater uses a patented method of heating based on high frequency induction, which provides optimised efficiency. Additionally, this method is very quiet and creates no magnetisation at all. In addition to bearings, the heater can also be used for heating metal components such as gears, pulleys, bushings and shrink rings.

  • Lightweight and portable (4,5 kg – 10 lbs)
  • Heating efficiency better than 85%
  • Components are never magnetised
  • Equipped with temperature and time control
  • Supplied with a heating clamp, temperature probe, power cable, heat resistant gloves and a carrying case

INDUCTION HEATER FOR BEARING MAX. 1 200 KG | TIH L SERIES:

 

SKF Induction Heater TIH L series

High efficiency, energy saving induction heater with a 1 200 kg bearing heating capacity

The SKF Induction Heater TIH L series are intended for heating large size
rolling bearings and components forming a closed circuit such as housings,
gear wheels and couplings.
With advanced power electronics and a dual coil design, the TIH L series can heat large bearings up to 1 200 kg (2 600 lbs), using just 20 kVA of electrical power. This is a power saving of almost 50 % compared to traditional induction heaters. Unusually for a bearing heater for large bearings, the TIH L series can be supplied in medium and low voltage versions. Available with two different operating areas, the TIH L series suits most bearings up to 1 200 kg.

Reviews

There are no reviews yet.

Be the first to review “SKF BEARING HEATER TIH MODEL”

Product Enquiry

Go to Top