MEGA PIPE REPAIR HD- Quick repair Damage pipe

MEGA PIPE REPAIR HD- Chemsearch

1. Prior to apaplication, turn off pressure in the pipe work system
2. Remove any oil, grease, loose rust; abrade an area approximately 10cm around the central of the leak
3. Remove bandage from its packaging and activate by submerging in temperature water for approximate 20 seconds
4.Wearing a pair of gloves, begin to wrap the bandage around the repair area. It is recommend to start directly over the damaged area ensuring to pull firmly after each wrap. Continue to apply the bandage, until a satisfactory thickness has been built up 12mm minimum.
5. After application the resin will begin to foam. Smooth and firmly press the wet resin into the bandage.
6. Allow to cure, this usually takes around 30 minutes