Series SL-43

For single-line, high-pressure central lubrication system
For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2
Output is externally adjustable
Indicator stem permits visual check of injector operation
May be combined in a circuit of Injectors SL-42, SL-41 and/or SL-44
Individual injectors can be easily removed for inspection or replacement
Carbon steel injectors wtih nitrile or flouroelastomer packings
Injectors with flouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed requires flouroelastomer packings for compatibility (indicated by black adjustment caps)

Specifications:

Series SL-43
Output:
- Minimum: .001 cu. in. (.016 cc)
- Maximum: .008 cu. in. (.131 cc)
Operating pressure:
- Minimum: 1200 psig (83 bar)
- Maximum: 3500 psig (241 bar)
- Typical: 1500 psig (103 bar)
- Vent: 200 psig (14 bar)

Model		Number of outlets	Connections		Dimensions
Carbon steel		Number of outlets	Manifold inlet	Injector outlet	A		B
Standard	Heat resistant		in. NPTF	in. O.D tube	in.	mm	in.	mm
83366-1	84429-1	1	1/4 (F)	1/8	1-1/4	32	1-3/4	44
83366-2	84429-2	2	1/4 (F)	1/8	2	51	2-1/2	63
83366-3	84429-3	3	1/4 (F)	1/8	2-3/4	70	3-1/4	82
83366-4	84429-4	4	1/4 (F)	1/8	3-1/2	89	4	101
83360	84110	–	–	1/8	Single injector / No manifold
Note: Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing. – 1/8″ O.D. as standard. Other outlet connectors for feed line optional. Injectors with manifolds include two mounting clips and screws. Injectors have nitrile packings (200°F max. (93°C)). Heat resistant injectors have flouroelastomer packings (350°F (176°C) max) and black adjusting cap. Checking packing compatibility with synthetic lubricants. Checking packing compatibility with synthetic lubricants. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./ turn.

LINCOLN 84429-3 (SL-43) Oil Injectors

Product Enquiry