Description
Description
SKF high performance, high temperature bearing grease
LGHP 2 is premium quality mineral oil based grease, using a modern Polyurea (di–urea) thickener. It is suitable for ball (and roller) bearings required to run extremely quiet, operating at a wide temperature range from –40 °C (–40 °F) up to 150 °C (302 °F), at medium to high speeds.
Extremely long life at high temperature
Wide temperature range
Excellent corrosion protection
High thermal stability
Good low temperature start–up performance
Compatibility with common Polyurea greases
Compatibility with lithium complex thickened greases
Low noise characteristics
Very good mechanical stability
Typical applications:
Electric motors: Small, medium and large
Industrial fans, including high speed fans
Water pumps
Rolling bearings in textile, paper processing and drying machines
Applications with high speed ball bearings operating at medium and high temperatures
Clutch release bearings
Vertical shaft applications
Kiln trucks and rollers
Technical data |
DIN 51825 code |
K2N-40 |
NLGI consistency class |
2-3 |
Soap type |
Di-urea complex |
Colour |
Blue |
Base oil type |
Mineral |
Operating temperature range, ºC (ºF) |
-40 to 150 (-40 to 300) |
Dropping point DIN ISO 2176, ºC (ºF) |
240 min. (464 min.) |
Base oil viscosity: |
|
40 ºC, mm2/s |
96 |
100 ºC, mm2/s |
10,5 |
Penetration DIN ISO 2137: |
|
60 strokes, 10-1 mm |
245 – 275 |
100 000 strokes, 10-1 mm |
365 max. |
Mechanical stability: |
|
Roll stability, 50 hrs at 80 ºC, 10-1 mm |
365 max. |
SKF V2F test |
– |
Corrosion protection: |
|
SKF Emcor: |
– standard ISO 11007 |
0 – 0 |
|
– water washout test |
0 – 0 |
|
– salt water test (100% seawater) |
0 – 0 |
Water resistance |
|
DIN 51 807/1, 3 hrs at 90 ºC |
1 max. |
Oil separation |
|
DIN 51 817, 7 days at 40 ºC, static, % |
1 – 5 |
Lubrication ability |
|
SKF R2F, running test B at 120 ºC |
Pass |
Copper corrosion |
|
DIN 51 811, 110 ºC |
1 max. |
|
|
Rolling bearing grease life |
|
SKF R0F test L50 life at 10 000 rpm, hrs |
1 000 min. |
|
at 150 °C (302 °F) |
EP performance |
|
Wear scar DIN 51350/5, 1 400 N, mm |
– |
4-ball test, welding load DIN 51350/4 |
– |
Fretting corrosion |
|
ASTM D4170 (mg) |
7 * |
Designation |
LGHP 2/(pack size) |
Reviews
There are no reviews yet.