Tel: +84 254 3577447 / HP: +84 983276457|datviet@datvietco.com

CMAS 100- MACHINE CONDITION

Machine monitoring, made simple

Now both novice users and experts can easily, quickly,
and accurately check the condition of rotating equipment
throughout your facility. Equipping your maintenance
and operations personnel with this rugged,
ergonomic and easy-to-use instrument can provide
early warning of potential machine problems before a
costly failure occurs.

Categories: ,

Description

Features
• Quick and easy to set up and use, measurements are shown on a bright display viewable in low light to direct sunlight. Free on-line training is also available at SKF @ptitude Exchange.
• Lightweight, compact, and ergonomically designed, the SKF Machine Condition Advisor fits neatly at the belt line, in a pocket or a tool kit. Exceptionally durable, the unit is rated IP 54 for use in industrial environments.
• Alert and Danger prompts provide increased diagnostic confidence.
• Measuring velocity, enveloped acceleration and temperature simultaneously saves time.
• Efficient, economical and environmentally friendly, the rechargeable SKF Machine Condition Advisor operates 10 hours on a single charge.
• Flexible enough to work with standard 100 mV/g constant current accelerometers, an optional external sensor can be used for hardto-reach locations and for more repeatable and accurate measurement results.
• Features English, French, German, Portuguese, Spanish and
Swedish for user convenience.

Multiple measurements with a single device The SKF Machine Condition Advisor provides an overall “velocity” vibration reading that measures vibration signals from the machine and automatically compares them to pre-programmed International Organization for Standardization (ISO) guidelines. An “Alert” or“Danger” alarm displays when measurements exceed those guidelines.Simultaneously an “enveloped acceleration” measurement is taken and compared to established bearing vibration guidelines to verify conformity or indicate potential bearing damage. The SKF Machine Condition Advisor also measures temperature using an infrared sensor to indicate uncharacteristic heat. Accuracy, flexibility and confidence When performing measurements, the SKF Machine Condition Advisor’s acceleration sensor input signal is processed to produce two different measurements for each POINT on the machinery-overall velocity and enveloped acceleration.

Specifications
• Vibration pickup:
– Internal: Integrated piezoelectric acceleration
– External: Accepts a standard 100 mV/g constant current accelerometer
• Temperature sensor: Internal infrared temperature sensor
• Measurements:
– Velocity:
· Range: 0,7 to 65,0 mm/s (RMS) (0.04 to 3.60 in./s (equivalent Peak), meets ISO 10816-3
· Frequency: 10 to 1 000 Hz, meets ISO 2954

– Enveloped acceleration:
· Range: 0,2 to 50,0 gE
· Frequency: Similar to Band 3 (500 to 10 000 Hz)
– Temperature:
· Range: –20 to +200 °C (–5 to +390 °F)
· Infrared temperature accuracy: 2 °C (4 °F)
· Distance: Short range, maximum 10 cm (4 in.) from target
• Operating temperature range:
– In use: –10 to +60 °C (15 to 140 °F)
– While charging: 0 to 40 °C (30 to 105 °F)
• Storage temperature:
– Less than one month: –20 to +45 °C (–5 to +115 °F)
– More than one month, but less than six months:
–20 to +35 °C (–5 to +95 °F)
• Humidity: 95% relative humidity, non-condensing
• Enclosure: IP 54
• Approvals: CE
• Drop test: 2 m (6.6 ft.)
• Weight: 125 g (4.4 oz.)
• Dimensions:
– Length: 200,0 mm (7.90 in.)
– Width: 47,0 mm (1.85 in.)
– Height: 25,4 mm (1.00 in.)
• Battery life: 10 hours before charging again (≈ 1 000 measurements)
– With external sensor: Up to 55% less battery life
• Supported external sensor: Any standard accelerometer with
100 mV/g sensitivity constant current
• External sensor power: 24 V DC at 3,5 mA
• Charger specifications:
– Universal AC/DC wall plug-in
– Input: 90 to 264 V AC, 47 to 60 Hz
– Output: 5 V DC regulated
– 3 to 4 hours for a full charge

Reviews

There are no reviews yet.

Be the first to review “CMAS 100- MACHINE CONDITION”

Product Enquiry

Go to Top