Tel: +84 254 3577447 / HP: +84 983276457|datviet@datvietco.com

Belt alignment tools TKBA 10 and TKBA 20

Belt alignment tools TKBA 10 and TKBA 20

Versatile tools for pulley and sprocket alignment

The SKF TKBA 10 and TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Categories: ,

Description

Belt alignment tools TKBA 10 and TKBA 20

Versatile tools for pulley and sprocket alignment

The SKF TKBA 10 and TKBA 20 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Features and benefits

  • Powerful magnets allow fast and easy attachment
  • Facilitates simultaneous adjustment of tension and alignment
  • Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
  • SKF TKBA 10 utilises a red laser and can be used for distances up to 3 m (10 ft)
  • SKF TKBA 20 utilises a highly visible green laser and can be used for distances up to 6 m (20 ft). It can even be used outdoors in sunny conditions
  • Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process

 

 TKBA 10

belttkba10-datvietco

case-tools-belt-tkba10-datvietco

Technical data
Designation TKBA 10
-Type of laser Red laser diode
-Laser 1x Built-in class 2 laser,
-Laser line length 2 m at 2 m (6.6 ft at 6.6 ft)
-Measurement accuracy angular Better than 0,02° at 2 m (6.6 ft)
-Measurement accuracy offset Better than 0,5 mm (0.02 in.)
-Measurement distance 50 mm to 3 000 mm (2 in. to 10 ft)
-Control Laser on/off rocker switch
-Housing material Aluminum, powder coat finish
-Dimensions
  -Transmitter unit 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
  -Receiver unit 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
  -Reflector dimensions 22 x 32 mm (0.9 x 1.3 in.)
-Weight
  –Transmitter unit 365 g (0.8 lbs)
  –Receiver unit 340 g (0.7 lbs)
-Mounting Magnetic, side mounted
-V-guides N/A
-Battery 2x AAA Alkaline type IEC LR03
-Operation time 25 hours continuous operation
-Carrying case dimensions 260 x 85 x 180 mm (10.3 x 3.4 x 7.0 in.)
-Total weight (incl. case) 1,3 kg (2.9 lbs)
-Operating temperature 0 to 40 °C (32 to 104 °F)
-Storage temperature –20 to +60 °C (–4 to +140 °F)
-Relative humidity 10 to 90% RH non-condensing
-IP rating IP 40
-Calibration certificate Valid for two years
-Case contents 1x TKBA 10 transmitter unit
1x TKBA 10 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate

TKBA 20

belt-tkba20-datvietco

case-tools-belt-tkba20-datvietco

Technical data
Designation TKBA 20
-Type of laser Green laser diode
-Laser 1x Built-in class 2 laser,
-Laser line length 2 m at 2 m (6.6 ft at 6.6 ft)
-Measurement accuracy angular Better than 0,02° at 2 m (6.6 ft)
-Measurement accuracy offset Better than 0,5 mm (0.02 in.)
Measurement distance 50 mm to 6 000 mm (2 in. to 20 ft)
-Control Laser on/off rocker switch
-Housing material Aluminum, powder coat finish
-Dimensions
-Transmitter unit 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
-Receiver unit 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
-Reflector dimensions 22 x 32 mm (0.9 x 1.3 in.)
-Weight
-Transmitter unit 365 g (0.8 lbs)
-Receiver unit 340 g (0.7 lbs)
-Mounting Magnetic, side mounted
-V-guides N/A
-Battery 2x AAA Alkaline type IEC LR03
-Operation time 8 hours continuous operation
-Carrying case dimensions 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in.)
-Total weight (incl. case 1,3 kg (2.9 lbs)
-Operating temperature 0 to 40 °C (32 to 104 °F)
-Storage temperature –20 to +60 °C (–4 to +140 °F)
-Relative humidity 10 to 90% RH non-condensing
-IP rating IP 40
-Calibration certificate Valid for two years
-Case contents 1x TKBA 20 transmitter unit
1x TKBA 20 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate

Reviews

There are no reviews yet.

Be the first to review “Belt alignment tools TKBA 10 and TKBA 20”

Product Enquiry

Go to Top